Açıklama
AP SERIES · VACUUM-ASSISTED DEWATERING
One Hydraulic Model, Multiple Package Configurations
Select the package arrangement required by the project. Hydraulic performance, pump curve and wet-end materials remain unchanged; the driver, base frame, mobility, acoustic enclosure and controls are configured for the application.
CONFIGURATION SELECTOR
Priming: AP Series packages use the APS DIA Prime mechanical diaphragm vacuum-assist system. ECO AP Series is presented separately with the JET Prime venturi system.
HYDRAULIC DATA
Pump Specifications
| Parameter | Value |
|---|---|
| Maximum flow | 820 m³/h |
| Maximum head | 140 m |
| Suction connection | DN 200 |
| Discharge connection | DN 150 |
| Efficiency at BEP | 82.9% |
| Solids handling | 37 mm |
| Maximum operating speed | 2200 rpm |
| Priming system | DIA Prime / JET Prime |
PERFORMANCE
Performance Curve
1000-2200 rpmBEP up to 82.9%NPSH curve included
WET-END CONSTRUCTION
Materials of Construction
| Component | Material |
|---|---|
| Volute | GGG40 |
| Bearing bracket | GG25 |
| Impeller | CA6NM stainless steel |
| Wear ring | GGG40 |
| Component | Material |
|---|---|
| Casing cover | GGG40 |
| Bracket | GG25 |
| Shaft | AISI 4140 |
| Shaft sleeve | AISI 420 |
Typical Applications
Construction dewatering, municipal bypass, mining drainage, flood response, industrial wastewater and agricultural water transfer.
Package Engineering
Engine, electric motor, control panel, base frame, trailer, acoustic enclosure and connection accessories are selected according to the duty point and site conditions.
Send us your duty point
Share flow, head, fluid and site details. APS engineers will configure the correct AP86C400 package.
Değerlendirmeler
Henüz değerlendirme yapılmadı.